Skateboard Parts Archive

Dusters cruiser board 7.5″ x 27″ with 13.25″ wheelbase with Extended wheel wells, slant 4.25″ trucks and 59mm x 43mm x 83A wheels.

Standard Diameter: 1/16″ / .0625 Inches

Metric Diameter: 1.5875mm

Grade: 5

Material: 440 Stainless Steel

Ball Weight (each): .000576729 Ounces / 0.01635 Grams

440 stainless steel balls offer the precise geometry and fine surface finish that makes them especially useful for bicycles, casters, drawer slides, door locks and many other applications with the added benefit of corrosion resistance. 440 stainless steel is a high carbon martensitic stainless steel which has high strength, good hardness and wear resistance. This type of stainless is capable of attaining, after heat treatment, the highest strength, hardness and wear resistance of all the stainless alloys. Unlike some stainless steel, this 400 series metal has a composition which allows it to be attracted to a magnet.

Standard Diameter: 5/16″ / .3125 Inches

Metric Diameter: 7.9375mm

Grade: 25

Material: 440 Stainless Steel

Ball Weight (each): .072065 Ounces / 2.043 Grams

440 stainless steel balls offer the precise geometry and fine surface finish that makes them especially useful for bicycles, casters, drawer slides, door locks and many other applications with the added benefit of corrosion resistance. 440 stainless steel is a high carbon martensitic stainless steel which has high strength, good hardness and wear resistance. This type of stainless is capable of attaining, after heat treatment, the highest strength, hardness and wear resistance of all the stainless alloys. Unlike some stainless steel, this 400 series metal has a composition which allows it to be attracted to a magnet.

Stash the quiver, clear your mind, and let the Loaded Cantellated Tesseract be your versatile companion in the quest for four-wheeled illumination. The Cantellated Tesseract integrates rocker, wheel well flares, W concave, and multiple wheelbase options into a lightweight package designed for high speeds, snappy slides, lofty ollies, and techy manual combos.

Form and Function — A wide kicktail meets your ollie-popping, tick-tacking, and manual-balancing needs. Multiple wheelbase options allow you to fine tune your setup based on riding style and truck geometry.

Curvaceous Confidence — A rockered profile cradles your feet for locked-in slides. Tall, wide W concave mellows out near the trucks to enhance comfort on long downhill runs while providing strong lateral support for sliding and cornering. Wheel well flares increase wheel clearance and create ergonomic reference points for your feet.

Light and Durable — Dual bamboo cores are sandwiched between layers of fiberglass to create a stiff and lightweight structure. A bottom layer of cork provides vibration damping and helps prevent abrasive damage from spreading.

Specs

Length: 36”
Width: 9.5”
Wheelbase: 24.5-26”
Weight: 4.5 lbs

What’s included?

One Cantellated Tesseract deck ONLY. Trucks, wheels, bearings, and hardware are NOT INCLUDED.

How should I set up my board?

TRUCKS: Loaded recommends 180mm reverse-kingpin trucks like Paris (43° or 50°) for optimal control and stability.
WHEELS: Loaded recommends 70mm wheels like Orangatang Stimulus for freeride and freestyle. 75-80mm grip wheels like Orangatang Kegels or In Heats work great for downhill and carving.

About

Loaded Boards was founded in 2000. Producing a broad line of progressive longboards and snowboards, they strive to grow the industry, community, and dynamic culture of board sports.

Dusters California Locos Chaz Complete 8.6×31.8 Skateboarding Completes

Standard Diameter: 3/8″ / .375 Inches

Metric Diameter: 9.525mm

Grade: 1

Material: Delrin Plastic

Ball Weight (each): .02187 Ounces / 0.62 Grams

Delrin (Polyoxy-Methylene), also known as Acetal, Polyacetal, and POM, is an engineering thermoplastic commonly used for precision parts that require high strength, hardness and rigidity. It is a tough material with a low coefficient of friction and high abrasion resistance. It has good electrical and dielectric properties, low water absorption and is FDA approved. Naturally white in color it does accept opaque colors well and can be polished to a shine. Delrin is typically difficult to bond but can be bonded with epoxies, polyurethanes and cyanoacrylates (superglue). It has good chemical resistance but is sensitive to mineral acids, chlorine, and alkaline degradation. Common uses include; pump parts, valve bodies, and bearings.

The Z-Ray Avenger 400 boat is perfect for relaxing on lakes and rivers. It holds up to 3 people who can sit comfortably on the included bench. Constructed of heavy duty vinyl, combined with a patented super tough drop-stitch floor, it is strong and stable on the water. Its 5 separate air chambers provide buoyancy and added safety. With an inflatable keel that enhances handling while under power, and a marine ply transom that can easily be outfitted with a motor, the Z-Ray Avenger can cover large distances with ease. And when the motor is not in use, the built-in Oarlock system makes rowing easy! a built-in automatic drain valve makes it easy to empty the boat of any water after a long day’s use.

NHS, Inc. is a United States sports equipment and outfit company based in Santa Cruz, California. NHS’s main products include skateboard decks, wheels, snowboarding gear and surfing equipment. The company was founded in 1973 by northern California surfers, Rich Novak, Doug Haut and Jay Shuirman. Santa Cruz Skateboards is a brand of skateboards manufactured by NHS, Inc.

Slave Leia 7.8″ X 31.7″ Santa Cruz Skateboards is honored to collaborate with Lucasfilm to present our Exclusive Special Edition Star Wars collection of Decks and Cruzers. Known for some of the most iconic graphics in skateboarding history, Santa Cruz has created new, exclusive interpretations of your favorite characters. 7 ply of the finest maple in skateboarding with medium concave. The “Shred Ready” model comes in standard shrink-wrapped packaging.

COMET TAKEOVER 39.25″ DECK-10×39.25